I have a split-rail fence as required by my subdivision. It’s now 20 years old and was again in need of replacing some rotted fence posts and rails. When I’ve had this work done in years past, I had to live with a “new wood” look until it also aged over time. Because I had so many posts and rails replaced this time I went to Home Depot with the intent of finding a suitable “weathered” stain. One of the salesmen told me that stain wouldn’t really work well. Instead he showed me a YouTube video giving instructions on weathering using white vinegar and steel wood pads. Sounds odd but I found many such videos so apparently I’m the last to know this trick.
I bought a half-gallon of vinegar and used 4 steel wool pads. In one of the videos I watched, it was suggested that if a darker color was desired to make black tea and spray it on the wood first. I didn’t want to do that plus I had only regular tea so I put 7 tea bags in the vinegar mixture. I put a lid on the container then let it sit for 24 hrs. I poured the mix into an all-purpose spray bottle I had on hand then sprayed all the new wood. VOILA!
In the photo all the top rails are new and the post on the right is new. They look a little different than the 20-year old rails but look a whole lot less obvious than the new wood did. They turned this color within a few hours. The photo below shows another sprayed post as it compares to a leftover of a new wood post. Pretty amazing isn’t it!
I do have a couple cautions.
1) Wear gloves because the spray will stain your hands, nails & especially cuticles. It also can stain kitchen counters. Use Chlorox!
2) The fibers from the steel wool may periodically clog the spray bottle’s tube so you may need to check the bottom of the suction tube to remove the fibers.