Tag Archives: Delta Porter bath faucet

I’m still pretending to be a plumber!

I’m a glutton for punishment! My half bath needed an update from the plain chrome faucet with plastic ball handles. I also was tired of the gawd-awful builder-grade glued ceramic/plastic towel rod and TP holder. I watched various videos on installing faucets to see if I could do it. As with my earlier Korky installation, the videos make it seem much easier than it really is. I also believe the job would be much easier with a 2nd person to help with the above-the-sink holding-things-in-place job.

pipes under bathroom sinkFirst problem is the small size of the cabinet in a half bath. Crawling in it to reach the gizmos holding the faucet in place is a challenge and requires a sturdy pillow to prevent pain on shoulder blades. Regular wrenches are useless. However, in the videos I watched I was introduced to two very handy tools.

tools needed to remove faucetsThe first is a Rigid Faucet & Sink Installer (red tool in photo). Follow that link to Rigid and you can watch a video of how versatile this tool is. In my case it didn’t work to get the nut off when I was removing the old faucet because my copper pipes were curved. This tool only works with straight pipes that can go in the tool’s opening. But once the pipe was removed, I could then use it for the piece that screws up tight against the sink. It worked just great when installing the new faucet.

The other metal tool is called a basin wrench. It can be extended to reach the top hex nut when arms are too short. The top black part has wrench teeth to grip the nut while you turn the bottom rod to leverage your strength. That top also flips over to other side depending on the direction you need the teeth to grip.

Delta Porter bath faucet

click to enlarge

I’ve partially got the new Delta faucet installed. Looks good from the top! Underneath I’m still working on it. The flexible connectors that I bought to replace the copper pipe is not fitting the pipe fitting that comes out from the wall. It seems the threads may differ. I may need to visit a plumbing store or last resort call a REAL plumber! 😦

I did just fine in removing the old GLUED towel & TP rods. I used a box cutter to slice around the glued parts so when I eased the ceramic off it wouldn’t tear off a large piece of drywall paper. I applied spackle a couple times, sanding in between each layer. Then I covered the spackle with a primer and sanded again. Finally I rolled on the paint to match the walls. When dry, I installed the rods. VOILA!

UPDATE EDIT: I called a plumber to help with the final connectors. He was impressed with my tools (pictured) and thought I did a great job considering how narrow my cabinet was. He said I did the hard part. That made me feel good.

Advertisements